Toa DP-SP3 - Manual (Page 48)

48
[Correcting the communication setting]
Retry setting with the procedures below.
(1) Select the device with an incorrect or duplicated IP address and click the [Modify IP Setting] button,
then the “IP Setting” screen is displayed. Enter the correct IP address.
Note: In this case, the network address of the PC running this PC Software is mandatorily designated.
Note: To perform default gate way setting, tick the [Enable edit of the “Default Gateway”] checkbox.
(2) To reflect the modified IP setting into the DP-SP3 unit, click the [Send Modified Settings] button.