Toa SX-2000 Series - Manual (Page 100)

100
EVENT SETTINGS
System Event Settings
12.3. System Event Settings
Set control output patterns in each state of the system.
Pressing the [System event] button on the Event Settings screen displays the System event settings screen.
(1) Control output pattern of emergency status
Select the control output pattern to be generated when the SX-2000 system is in an emergency broadcast
condition.
None (default), Set Control Output Pattern Available Settings
(2) Control output pattern of AC-mains failure status
Select the control output pattern to be generated when the SX-2000 system is battery operated.
None (default), Set Control Output Pattern Available Settings
Note
This function is available only when the Emergency broadcasting
function is set to "Used" in the "Basic Settings."
If "Not used" has been selected for the Emergency broadcasting
function, the screen at right is displayed, and it is not possible to
select the control output patterns.
Note
This function is available only when the Surveillance function is
set to "Used" in the
"Basic Settings" (p. 29) .
If "Not used" has been selected for the Surveillance function,
the screen at right is displayed, and it is not possible to select
the control output patterns.
(1)
(2)