Toa AD-0910 - Manual (Page 2)

3. SPECIFICATIONS
When Installing the Unit
• Never plug in nor remove the power supply plug
with wet hands, as doing so may cause electric
shock.
• When unplugging the power supply cord, be sure
to grasp the power supply plug; never pull on the
cord itself. Operating the unit with a damaged
power supply cord may cause a fire or electric
shock.
• When moving the unit, be sure to remove its power
supply cord from the wall outlet. Moving the unit
with the power cord connected to the outlet may
cause damage to the power cord, resulting in fire or
electric shock. When removing the power cord, be
sure to hold its plug to pull.
• Do not block the ventilation slots in the unit's cover.
Doing so may cause heat to build up inside the unit
and result in fire.
• Avoid installing the unit in humid or dusty locations,
in locations exposed to the direct sunlight, near the
heaters, or in locations generating sooty smoke or
steam as doing otherwise may result in fire or
electric shock.
When the Unit is in Use
• Do not place heavy objects on the unit as this may
cause it to fall or break which may result in
personal injury and/or property damage. In
addition, the object itself may fall off and cause
injury and/or damage.
• If dust accumulates on the power supply plug or in
the wall AC outlet, a fire may result. Clean it
periodically. In addition, insert the plug in the wall
outlet securely.
• Switch off the power, and unplug the power supply
plug from the AC outlet for safety purposes when
cleaning or leaving the unit unused for 10 days or
more. Doing otherwise may cause a fire or electric
shock.
CAUTION
Indicates a potentially hazardous situation which,
if mishandled, could result in moderate or minor
personal injury, and/or property damage.
2. GENERAL DESCRIPTION
The AD-910 AC Adapter is designed for exclusive use with the Chairman units TS-801 and TS-901, and the
Delegate units TS-802 and TS-902 of the TOA Infrared Conference Systems.
Power Source 100 – 240 V AC, 50/60 Hz
Output 9 V DC, 1 A
Ripple Voltage 100 mV (p-p)
Current Consumption 100 mA AC (Input 230 V)
Cord Length 1.8 m
Plug RC6705, center "+"
Operating Temperature 0°C to 40°C
Finish Case: PC/ABS alloy, black
Dimensions 47.4 (w) x 33 (h) x 86.5 (d) mm (excluding a power cord)
Weight 190 g
Note: The design and specifications are subject to change without notice for improvement.
• Accessory
AC power cord (2 m) .......................................................................................... 1
133-22-290-20
URL: http://www.toa.jp/
Traceability Information for Europe (EMC directive 2004/108/EC)
Manufacturer:
TOA Corporation
7-2-1, Minatojima Nakamachi, Chuo-ku, Kobe, Hyogo,
Japan
Authorized representative:
TOA Electronics Europe GmbH
Suederstrasse 282, 20537 Hamburg,
Germany