Toa AD-5000-2 - Manual (Page 3)

3
2. GENERAL DESCRIPTION
The AD-5000-2 is an AC adapter to operate the BC-5000-2 Battery Charger on AC power.
3. SPECIFICATIONS
• Accessory
AC power cord (2 m or 6.56 ft) ......................... 1
Note: The design and specifications are subject to change without notice for improvement.
Power Source 100 – 240 V AC, 47 – 63 Hz, 1 A
Output 12 V DC, 2 A
Ripple Voltage 120 mVp-p
Cord Length 1.8 m (5.91 ft)
AC Power Plug Type of plug differs depending on the country where the unit is used.
Operating Temperature 0 to 40°C (32 to 104°F)
Finish
Case: PC/ABS alloy, black
Dimensions 46 (w) x 31.4 (h) x 99.4 (d) mm or 1.81" x 1.24" x 3.91"
(excluding power cord)
Weight 175 g (0.39 lb)
Traceability Information for Europe (EMC directive 2004/108/EC)
Manufacturer:
TOA Corporation
7-2-1, Minatojima-Nakamachi, Chuo-ku, Kobe, Hyogo,
Japan
Authorized representative:
TOA Electronics Europe GmbH
Suederstrasse 282, 20537 Hamburg,
Germany
The apparatus shall be connected to a mains socket outlet with a protective earthing connection.
The socket outlet shall be installed near the equipment and shall be easily accessible.