Toa IR-520R - Manual (Page 2)

133-07-279-40
2. GENERAL DESCRIPTION
The IR-520R Infrared Wireless Receiver is designed for exclusive use with the IR-702T Infrared
Wireless Tuner. It can be mounted to a wall or a microphone stand.
URL: http://www.toa.jp/
Traceability Information for Europe (EMC directive 2004/108/EC)
Manufacturer:
TOA Corporation
7-2-1, Minatojima Nakamachi, Chuo-ku, Kobe, Hyogo,
Japan
Authorized representative:
TOA Electronics Europe GmbH
Suederstrasse 282, 20537 Hamburg,
Germany
3. SPECIFICATIONS
• Accessories
Stand mounting bracket .................................... 1
Machine screw (M4 x 10) ................................. 2
Note: The design and specifications are subject to change without notice for improvement.
Power Source 24 V DC (supplied from the optional IR-702T)
Current Consumption Max. 30 mA
Wavelength 870 nm
Carrier Frequency Channel A: 3.100 MHz
Channel B: 3.350 MHz
Communication Area Approx. 15 m or 50 ft (in the space where no obstacles exist)
Connection Terminal 75 Ω, BNC jack
Operating Temperature 0 to 40 °C (32 to 104 °F)
Operating Humidity 30 to 85% RH
Finish Filter: Polycarbonate resin, visible light cut filter
Dimensions 84.5 (w) x 63.5 (h) x 32 (d) mm (3.33" x 2.5" x 1.26")
Weight 100 g or 0.22 lb (unit only)
Infrared Detector
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
Any modifications made to this device that are not approved by TOA Corporation may void
the authority granted the user by the FCC to operate this equipment.
FCC Compliance