Toa S5-ADU - Manual (Page 6)

6
6. OPerATIOn
Step 1. Turn on the power of both the S5-ADU and connected tuners (the power lamp lights)
Step 2. Set the wireless microphone switch to the ON position.
7. rAcK MOUnTInG
The rack mounting kit is available as an accessory for S5 systems.
7.1. When mounting two S5-ADU units in a 19" rack
Step 1. Remove 3 case holding screws (M3 x 6) from
opposite sides of each unit’s case. Then,
mount the rack mounting brackets there using
the screws as shown at right.
Step 2. Remove plastic plugs from top of the units,
insert the joint bar into the case side slots, and
fix it with screws (M3 x 6, black).
Step 3. Fix 2 units together using the remaining 2 joint
bars and CSK screws (M3 x 6) on their bottom
side.