Toa PC-2268WP - Manual (Page 12)

533-06-206-9A
URL: http://www.toa.jp/
5. WIRING DIAGRAM
8Ω
13 kΩ
6.7 kΩ
3.3 kΩ
0
Input terminal
Rear case section
HOT (black)
HOT
(+)
Intermediate
connector Intermediate
connector
Bridge
Front case section
Matching
transformer
1.7 kΩ (black)
COM (white)
COM (white)
COM
(-)
Note
The input line (black) is connected to 1.7 kΩ tap
at the factory.
6. SPECIFICATIONS
Note: The design and specifications are subject to change without notice for improvement.
• Accessories
Speaker mounting panel ............................ 1
Knob nut ..................................................... 2
Tapping screw (4 x 35) ............................... 2
Machine screw (M4 x 35) ........................... 2
Rated Input 6 W (for 100 V line), 3 W (for 70 V line)
Rated Impedance 100 V line: 1.7 kΩ (6 W), 3.3 kΩ (3 W), 6.7 kΩ (1.5 W), 13 kΩ (0.8 W)
70 V line: 1.7 kΩ (3 W), 3.3 kΩ (1.5 W), 6.7 kΩ (0.8 W), 13 kΩ (0.4 W)
Sensitivity 90 dB (1 W, 1 m, 330 – 3300 Hz, pink noise)
Frequency Response 160 – 16000 Hz (20 dB below peak)
Speaker Component 12 cm cone-type
Applicable Cable 600 V vinyl-insulated cable (IV wire or HIV wire)
Solid copper wire: ø0.8 – 1.6 mm (equivalent to AWG 20 – 14)
7-core twisted copper wire: 0.75 – 1.25 mm
2 (equivalent to AWG 18 – 16)
Connection Push-in connector (bridging terminal)
Operating Temperature –10°C to +50°C
Water Protection IPX4
Finish Front case, Rear case: Fire-resistant HIPS resin
(resin material grade: UL-94 V-0), light gray
Speaker mounting panel: Surface-treated steel plate, Off-white, powder coating
Dimensions ø220 x 80.5 (d) mm (unit only, projections excluded)
ø150 x 5 (d) mm (Speaker mounting panel)
Weight 890 g (unit only), 180 g (Speaker mounting panel)