Vermont Casting VC0620P - Manual (Page 12)

1.
2.
3.
12
Assembly Step 3 - Attach Grill Bottom to Pillar
Working from the back (open) side of the pillar,
set the heat shield on top of the pillar.
Set the grill bottom on top of the heat shield. Line
up the burner tubes with the control valve orifices
inside the pillar. Adjust the grill bottom and heat
shield to line up the bolt holes.
Insert the bolts through the grill bottom and
tighten the nuts from inside the pillar.
Tools Needed:
USE HARDWARE BAG B :
LOCATE THESE PARTS:
3/8”
wrench
back side of grill
heat
shield (1)
grill bottom
assembly (1)
1/4-20 x 1”
bolt (4)
7/16”
wrench
1/4-20
nut (4)