Toa C-CC774 PL User Manual
Page 28
Advertising
28
8.6. Suspension Bracket Installation
The C-BC711P Suspension Bracket is required to suspend the camera from a ceiling.
Note
Mount the bracket to a concrete wall or robustly constructed wall surface that can sufficiently withstand the
weight of the units.
1. Make a cable entry hole of ø 50 – 100 mm on a ceiling.
Hole diameter: ø 50 – 100mm
C-BC711P
(optional)
2. Attach the suspension bracket to a ceiling.
Note: Bolts, etc. are not supplied with the bracket.
Ceiling surface
Anchor bolt
M8, M10 or W 3/8
Plain washer
Spring washer
Nut
3. For installation procedures of the housing, camera unit and the dome cover, refer to p. 20 as the
procedures are the same as that of wall mounting.
Advertising
This manual is related to the following products: