Toa VX-200PS ER - Manual (Page 27)

27
11. SPECIFICATIONS
11.1. VX-2000DS Emergency Power Supply
230 V AC, 50/60 Hz
240 W max.
YUASA NP Series (12 V x 2 or 4)
Trickle charging
5 A max.
27.3 V ±0.3 V (at 25°C)
Temperature correction coefficient: –40 mV/°C
6, M4 screw terminal, distance between barriers: 11 mm
6 (25 A max. each), M4 screw terminal, distance between barriers: 11 mm
RJ45 female connector for connecting the VM-3240VA or VM-3360VA
Twisted-pair straight cable (TIA/EIA-568A standard)
Type of control signal: Battery check, AC power status, DC power status,
charging circuit failure, and battery failure
1 pair of positive and negative terminals
Applicable cable diameter: AWG 6 – AWG1/0
0°C to +40°C
Panel: Surface-treated steel plate, black (30% gloss), paint
482 (w) x 88.4 (h) x 377.6 (d) mm
10.5 kg
Power Source
Power Consumption
Applicable Battery
Charging Method
Charging Current
Charging Output Voltage
Power Supply Input
DC Power Output
Control Connector
Battery Connection
Operating Temperature
Finish
Dimensions
Weight
• Accessories
Rack mounting screw (5 x 20) .................... 4
Fiber washer .............................................. 4
Blade fuse (40 A) ....................................... 3
Fuse (T3.15 A L) ........................................ 1
Power cable (2 m) ...................................... 1
Note: The design and specifications are subject to change without notice for improvement.
11.2. VX-200PS Power Supply Unit
230 V AC, 50/60 Hz
580 W
Rated output: 210 W (29 V, 7.25 A) x 2
Peak output: 400 W x 2
M4 screw terminal, distance between barriers: 11 mm
0°C to +40°C
VX-2000PF
Surface-treated steel plate
135 (w) x 118.2 (h) x 333.8 (d) mm
13.2 kg
Power Source
Power Consumption
DC Power Output
Operating Temperature
Applicable Frame
Finish
Dimensions
Weight
• Accessories
Fuse (T3.15 A L) ........................................ 1
Power cable (2 m) ...................................... 1
Note: The design and specifications are subject to change without notice for improvement.