Touchstone 72012 Elevate Unfinished Touchstone's Value Priced Wood TV Lift Cabinet - Manual (Page 14)

Touchstone TV Lift 14
www.touchstonehomeproducts.com 800.215.1990
Hookup Lift Control Box and Power Supply
Tools Needed:
none
Parts Needed During This Step:
- Control box
- Power supply
- Wired remote
Instructions:
Installing Control Box
1. Remove the backing from the Velcro on the back of the control box.
2. Place control box in the location of your choosing on the floor of cabinet.
Attach Lift Cable into Control Box
1. Attach the lift cable to the Motor port on the control box.
Install Wired Remote
1. Remove the backing from the Velcro attached to the wired remote
2. Place the wired remove in a location of your choosing on the wall on the inside
of the cabinet
3. Attach the cable for the wired remote to the control box.
Install Power Cable
1. Remove the backing from the Velcro attached to the power supply.
2. Place the power supply in a location of your choosing on the floor
of the cabinet.
3. Attach the cable from the power supply to the power port on the control
box and plug the power cable into the wall outlet.