Traveler Guitar Escape Mark III - Manual (Page 4)

OVERVIEW AND SET-UP
SET-UP:
The Escape Mark III is ready to play right out of the gig bag.
USING HEADPHONES:
The built-in headphone amp powers headphones from the labeled 1/8” output on the control plate. To turn the
headphone amp on, simply plug into the headphone jack. Be sure to unplug all cables from your guitar when not in
use to save battery life.
USING THE AUX-IN:
The built-in electronics allow you to mix an auxiliary signal with the guitar’s signal both through the amp or
headphones. Simply plug your mobile device into the 1/8” Aux-In jack on the control plate. Adjust volume on your
device to a desired level.
SET-UP