Casio EX-P505 - Manual (Page 191)

VIEWING IMAGES ON A COMPUTER
191
Using the Camera with a Macintosh
Computer
The following are the general steps for viewing and copying
files from a Macintosh.
You can find details about each operation in the
procedures that follow below. Note that you should also
refer to the documentation that comes with your Macintosh
for other information about USB connections, etc.
IMPORTANT!
• Movie files cannot be played back on a Macintosh.
• This camera does not support operation on a
computer running Mac OS 8.6 or lower, or Mac OS X
10.0. If you have a Macintosh running Mac OS 9 or
OS X (10.1, 10.2, or 10.3), use the standard USB
driver that comes with your OS.
1. Load a fully charged battery into the camera, and
configure the required camera settings for USB
connection to a computer.
2. Use the USB cable to establish a connection between
the camera and your Macintosh.
3. View and copy the images you want.