Traxxas 57076-1 - Manual (Page 11)

V/T - Voltage/Temp Sensor Port**
RPM - RPM Sensor Port**
BATT/
CH5 - Battery/Channel 5*
CH4 - Channel 4*
CH3 - Channel 3*
CH2 - Speed Control
CH1 - Steering Servo
CH1 - Steering Servo*
* Not used ** Accessory sensor port for use with the Telemetry Expander Module
(see Traxxas.com and included materials for more information)
SPARTAN • 11
Your model is equipped with the newest Traxxas TQi transmitter
with Traxxas Link ™ Model Memory. The transmitter has two
channels for controlling your throttle and steering. The receiver
inside the model has 5 output channels. Your model is equipped
with one servo and an electronic speed control.
WIRING DIAGRAM
Antenna
Receiver
Brushless Motor
(see side bar for proper
motor wiring)
Channel 2
Electronic
Speed Control
Channel 1
Steering Servo
to Motor
LED
Watercooling
Output
Watercooling
Input
VXL-6s MARINE ELECTRONIC SPEED CONTROL
Traxxas High-Current
Connectors (Male)
to Batteries
Traxxas High-Current
Connector (Male)
to Battery
Receiver Cable
(RX wire)
TQ
i
RADIO & BRUSHLESS POWER SYSTEM
ESC/Motor Wiring Diagram
TRANSMITTER AND RECEIVER
Steering
Trim
Multi-Function
Knob
Throttle
Trigger
Throttle Neutral
Adjust
Steering Wheel
Power Switch Battery Compartment
Set Button
Menu Button
Red/Green Status LED
see page 26 for more info
Link
Button
LED
Sensor Expansion
Port **
**Accessory sensor port for use with the Telemetry
Expander Module (see Traxxas.com for more information).