Triner Scale TSM Series - Manual (Page 13)

Set Up Guide | Floor Scale
11
Condition Possible Problem & Correction
Scale displays erratic
weights.
• Interface Cable cut or
disconnected: Replace or
Properly repair cable.
• Interface Cable wiring problem:
Check connections inside
junction box and at indicator.
• Platform not level: Level the
scale by properly adjusting the
leveling feet.
• Load cell connections faulty:
Check load cell connections
inside junction box.
• Load cell or load cell cable
damage: Inspect load cell
cables. Test and replace
Loadcell if needed.
• Bad power supply: Check outlet
first. Test the AC adapter or
power supply.
• Debris under the scale platform:
Check and clean debris from
under the platform (Periodic
Maintenance).
• Indicator faulty. Use simulator
to test for stability. Service or
replace.