True Induction F-IH-01SS - Manual (Page 3)

2
OPERATION
Installation : Maintain a distance of 10CM (5 inches) between the appliance and walls or other objects.
Cookware : Suitable cookware includes
Steel or enamelled cast iron
Iron, steel or non-enamelled cast iron
18/0 stainless steel and aluminium (if marked suitable for induction cooking) Unsuitable cookware
includes:
Cookware with a diameter of less than 12cm
Ceramic or glass cookware
Stainless steel, aluminium, bronze or copper cookware unless marked as suitable for induction
cooking
Cookware with feet
Cookware with a rounded bottom (e.g. wok)
Control Panel :
1. Time selection
2. Reduce time, temperature or power
3. LCD Display
4. Increase time, temperature or power
5. Heat, Temperature and Timer indicator lights
6. Temperature button
7. On/Off button
8. Heat button
9. Power indicator
Cooking:
1. Connect the appliance to the mains power supply. A beep will sound and the display will briefly light up.
2. Place suitable cookware on to the centre of the glass plate.
3. Press the On/Off button to turn the appliance On.
4. Press either the HEAT or TEMP button, depending on your cooking requirements. The
corresponding indicator light comes on.
5. Press the UP or DOWN buttons repeatedly to reach the desired setting. This setting can be changed at
any time during the cooking process.
150℉, 160℉, 170℉, 180℉, 190℉, 200℉, 210℉, 220℉, 230℉, 240℉, 250℉, 260℉, 270℉, 280℉,
290℉, 300℉, 310℉, 320℉, 330℉, 340℉, 350℉, 360℉, 370℉, 380℉, 390℉, 400℉, 410℉, 420℉, 430
℉, 440℉, 450℉. The defaults is 270℉.
400W ,600W, 800W, 1000W, 1200W, 1400W, 1600W, 1800W, 2000W, 2200W, 2400W, 2600W,
2800W ,3000W, 3200W. Total 15 level. The defaults is 1600W.
6. Press the TIMER button: ‘0’ appears on the display.
7. Press the UP or DOWN buttons repeatedly to set the cooking time. The time can be set in 5 minute
increments up to a maximum of 150 minutes, which then counts down in 1 minute increments.