TruTrak GX Pilot - Manual (Page 7)

TruTrak Flight Systems 4 GX Pilot Installation/User Manual
March 2011 Rev B
-STATIC LAG- This should be left at 0 unless advised by the factory.
-MICROACTIVITY- This should be left at 0 unless advised by the factory.
-HALF STEP?- This should be left at N unless advised by the factory.
The first flight should be done after having completed all the setup and testing on the ground. Insure that the servos have
sufficient torque to properly fly the aircraft as they are installed. The autopilot should be able to handle considerable
turbulence. It is best to test the autopilot in its basic mode first. Engage it in the AP mode first before using it coupled to the
G3X system. This will insure you are able to tune the settings to correctly fly your aircraft before introducing another variable.