8 resetting to factory settings, 9 setup menu – TruTrak KRT2 Comm Radio IR User Manual
Page 23
23
3.8 Resetting to Factory Settings
Returning to the factory settings can only be initiated during power-up.
During power-up the MEMORY and DUAL buttons must be pressed
simultaneously and the display will show SET DEFAULTS. When the
buttons are released the resetting to the factory settings takes place.
When resetting is completed DONE is displayed.
Resetting to the factory settings will not change any data in the favorite list
memory.
3.9 Setup Menu
During power-‐up the MEMORY buttons must be pressed
There are two functions within the Setup menu:
•
ERASE – Erasing of the favourites (frequency and designator)
•
Channel Spacing – 25kHz / 8.33kHz
In the United States, the 8.33kHz channel spacing may not
be used. There is currently no provision in the regulations
for 8.33kHz channel spacing.
Programming
of
the
Setup
is
done
with
the
lower
3
buttons.
Their
function
is
described
on
the
display.
MEMORY EXCHANGE FREQ
Setup
program
is
exited
with
the
MEMORY
button.
The
unit
remains
powered
and
the
normal
operating
mode
is
resumed.
EXCHANGE
=