TruTrak Sorcerer - Manual (Page 7)

7
selected, this is the final lateral setup screen. Click the knob to exit the
lateral setup mode. If Y is selected push VS UP on the rocker to advance
to the next setup screen.
If the YAW DAMPER? was answered with Y, then the next
setup screen will be for YD LEVELING. This is the fine adjustment for
the yaw damper to maintain a ball centered condition. The value is
adjustable from -8 to 8 and is used as necessary to have the yaw damper
keep the aircraft slip/skid indicator (ball) centered when the yaw damper
is engaged and the autopilot is flying the aircraft straight and level.
When adjusting this value, allow a few seconds for the yaw damper to
respond to each new value setting.
The final setup screen is for yaw damper activity. The yaw
damper activity functions exactly like the lateral and vertical activity
settings. This setting is adjustable from 0 to 12, where 0 is the lowest
activity and 12 is the highest activity.
Vertical Setup
To enter the vertical setup menu, press and hold the ALT button for
two or more seconds until the first setup screen appears. This screen is
the VRT ACTIVITY adjustment. Any value between 0 and 24 may be
chosen. Choose a level that gives the best overall performance in all
modes of flight.
The next setup screen is for VRT TORQUE. Any value between 0
and 12 may be selected. A default value of 12 is set at the factory.