Led indicator lights, Wi-­‐fi connection / operation – TruTrak TS-83 Rev C User Manual

Page 10

Advertising
background image

10

LED  Indicator  Lights  

Refer   to   the   photo   on   page   seven   for   light  
locations.  
 
-­‐Wi-­‐Fi  Light  Green:    Wi-­‐Fi  network  is  powered  and  
initializing.  

 
-­‐Wi-­‐Fi   Light   Amber:     Wi-­‐Fi   network   is  
broadcasting  data.  
 
-­‐Wi-­‐Fi   Light   Red:     Wi-­‐Fi   network   failure   or  
hardware  failure.  

 
-­‐USB  Light  Green:    USB  data  recording  is  ready.      
 
-­‐USB   Light   Amber:     USB   data   is   being   written   to  
the   connected   flash   memory   device.     It   should  
blink  every  few  seconds  to  indicate  a  data  write.  
 

-­‐USB  

Light  

Red:  

 

USB  

failure,  

incompatible/corrupted   USB   memory   device  
inserted  or  file-­‐write  failure.      




Wi-­‐Fi  Connection  /  Operation  

When   the   LED   indicator   light   on   the   top   labeled  
Wi-­‐Fi   is   orange,   the   Wi-­‐Fi   network   is   active   and  
broadcasting  data.    Go  to  the  settings  page  on  the  
iPod,   iPad,   or   iPhone.     Go   to   the   Wi-­‐Fi   settings.    
Choose  the  network  that  is  labeled  TTFS  Wi-­‐Fi.    If  

your   device   has   cellular   data   capability,   you   may  
have   to   turn   cell   data   off   before   it   will   join   the  
wireless  network.    Once  the  device  shows  the  Wi-­‐
Fi  bars  at  the  top,  then  launch  iMonitor.  


Advertising