Crestron electronic STX-1700CXP - Manual (Page 28)

2-Way RF Wireless Touchpanel Crestron STX-1700CXP
24 • 2-Way RF Wireless Touchpanel: STX-1700CXP Operations Guide - DOC. 6144
Uploading a VT Pro-e Project
A compiled VT Pro-e file has the
extension .vtz
To upload a compiled VT Pro-e project to the STX-1700CXP, complete the
following steps.
1. Make sure that “Communication Settings” that begins on page 20 has been
performed.
2. As shown below, select File Transfer | Send Touchpanel (alternatively,
depress Alt+T) from the Viewport menu.
Select Send Touchpanel
3. As shown below, select the NET ID of the STX-1700CXP and then click
OK. The “Touchpanel Transfer” window appears (refer to graphic below).
“Select Network ID” Window
“Touchpanel Transfer” Window
4. Click Browse. The “Open” window appears as shown on the next page.
5. Select the VT Pro-e (.vtz) file and click Open. The transfer completes
automatically.