Step 4 – filter rails (continued), Step 5 – filters, Step 6 – hood rails – Twin City Modular Gravity Hood - MGI with Filters - IM-4720FSS User Manual
Page 3
3
Twin City IM-4720FSS
Stiffener Angle
Screw, Hex Head
Hex Nut, Flanged
Step 4 – Filter Rails (Continued)
Fasteners (Kit #6A)
Attach
Stiffener Angle with cap screws and nuts, hand tighten. For base widths 42" and larger, assemble Filter
Channel, Type -C- by sliding channel into Filter Stop Plate channel and then bolting to Stiffener Angle. See Detail A.
Figure 5.
Filter Rail, Type -C-
DETAIL A
THROAT WIDTH 42" & LARGER
Filter Stop Plate
Stiffener Angle
Step 5 – Filters
Slide filters into assembly and tighten all fasteners.
Figure 6.
Step 6 – Hood Rails
Fasteners (Kit #3) –
Note: There may be extra
fasteners.
Install two
Hood Rail Assemblies to the Hood
Mount Bars using cap screws and nuts. Do not
fully tighten fasteners. They will be tightened in
Step 9.
Base Assy
Hood Rail Assy
Nut, Serrated Flange
Screw, Serrated Flange
Figure 7.