Twin Eagles TESB132F-B - Manual (Page 5)

4
FREESTANDING INSTALLATION INSTRUCTIONS
1. Remove the front side shelf bracket (See fig. 1) by removing the flat head screws allowing you to
remove the side shelf from the base cabinet. Save the screws
2. Install the front side shelf bracket by securing it with the saved flat head screws.
Fig. 1
3. Insert the pin of the rear bracket into the hole on the back of the side burner housing. Then slide
the front pin into the slotted hole on the front of the side burner housing. (Figure 2)
4. For easy access inside the grill base cabinet you may remove the right side door by snapping off
the hinges.
5. Secure the side burner with the 1/4-20 stainless steel nuts (D) and bolts (C) provided (2 places).
(Figure 2)
6. Hook-up gas connection as shown in figure 2. Use pipe sealant suitable for use with LP and
natural gas. Check leaks using water and soap solution.
7. Reinstall right side door.
Components supplied in the package:
A. 1 pc. s/s flexible tubing
B. 1 pc Connector, Brass, 3/8 M Flare x 1/4 MPT
C. 2 pcs. 1/4-20 s/s bolt
D. 2 pcs. 1/4-20 s/s nut
Fig. 2