TYREDOG TD-4000A-X - Manual (Page 3)

3
Precautions
1. For alve stem used on Motorcycle, please use lock-fixed type, not in
rubber made.
2. Please make sure the LCD display can receive signals from two tire
pressure sensors.
3. Tyredog TPMS has unique anti-theft tool to prevent sensor being
stolen. You can decide whether install or not.
4. Please double confirm if sensors are fitted tightly. If necessary,
please spreading detergent water on the valve stem to check any air
leakage.
5. If tire pressure is getting down or dropping quickly, please stop car
immediately to find out if tire is deflated or another other problem.
6. The monitor will automatically make connections in whole system
when car starts to run. It is normal that some tire pressure figures
might not be updated immediately due to there is no change of tire
pressure in those tires at all.
7. Tyredog TPMS has mechanism to avoid interfering /being interfered
with other signals.
8. Many environmental factors cause tire temperature rise and down as
well. For example, hot weather or warm tire will lead rising tire
pressure.
9. It is natural that tire pressure will decrease by days but not caused
by the installation of tire pressure monitoring system. Tyredog TPMS
can response with its real figure of pressure.
10. If monitor gets wet accidentally by rain, etc., please don’t power on
monitor until it is dried.