VACUUBRAND VAP 5 User Manual
Page 5
page 5 of 17
Documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check
carefully the validity of this document with respect to his product. manual-no.: 999039 / 16/12/2009
Ensure that maintenance is done only by suitably trained and supervised technicians.
Ensure that the maintenance technician is familiar with the safety procedures which
relate to the equipment processed by the vacuum system and that the equipment if
necessary is approximately decontaminated before starting maintenance.
Use only genuine spare parts and accessories.
☞ Otherwise safety and performance of the equipment as well as the electromagnetic
compatibility of the equipment might be reduced.
Return of the equipment to the factory for repair, the manufacturer accepts warranty
only if housing has not been opened.
Repair of the gauge head VSP 5 and VSK 5 is not possible.
In order to comply with law (occupational, health and safety regulations and regulations
for environmental protection) products returned to the manufacturer can be repaired /
DKD calibrated only when following certain procedures (see section ”Notes on return
to the factory”).