VACUUBRAND VNC 1 - Manual (Page 2)

Documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check
carefully the validity of this document with respect to his product. Manual-no.: 999118 / 16/12/2009
page 2 of 35
After sales service: Contact your local dealer or call +49 9342 808-193.
Dear customer,
Your VACUUBRAND vacuum controller shall support you at your work for a long time without any trouble
and with full load output. Thanks to our large practical experience we attained much information how you
could add to an efficient application and to personal safety. Please read these instructions for use prior to
the initial start-up of your controller.
VACUUBRAND vacuum controllers are the result of many years of experience in construction and practical
operation of these vacuum controllers combined with the latest results in material and manufacturing
technology.
Our quality maxim is the ”zero fault principle”:
Every delivered vacuum controller is tested extensively including an endurance run. Due to this endurance
run, also faults, which occur rarely, are reported an can be corrected. Every single vacuum controller is
tested on achievement of the specification after the endurance run.
Every VACUUBRAND controller leaving our factory achieves the specification. We feel obliged to
this high quality standard.
We are aware that the controller should not draw a part of the real work and we hope to contribute with our
products to an effective and troublefree realisation of your work.
Yours
VACUUBRAND GMBH + CO KG