Canon IMAGEFORMULA CR-190I - Manual (Page 51)

51
Make the following adjustments to maintain scanning quality.
Replacing the Ink Cartridge
The ink cartridge needs to be replaced if the printed text becomes
scratchy or faint even if you have cleaned the ink jet nozzle. Replace
the ink cartridge according to the following procedure below.
IMPORTANT
• The ink disposal tank must be replaced when the ink cartridge is
replaced.
• To replace the ink cartridge, turn the scanner OFF before removing
the Top Cover. After the ink cartridge is set, replace the Top Cover,
and then turn the scanner back ON.
NOTE
• Use a Canon ink cartridge. (See “About the Ink Cartridge,” on p. 23.)
• Do not use more than one cartridge by rotation. If you do so, applications
cannot check the ink level precisely.
A
Remove the Top Cover.
B
Squeeze the Print Position Adjustment Lever, and lift it up to
the top position.
C
Push the ink cartridge backward, and then remove the ink
cartridge.
CAUTION
Do not touch the ink jet nozzle right after imprinting. The nozzle may be
very hot.
D
Set the ink cartridge.
For more information, see “Setting the Ink Cartridge and
Adjusting the Print Position,” on p. 23.
Maintenance