Compaq 110 - Manual (Page 110)

5–42 Maintenance and Service Guide
Removal and Replacement Procedures
9. Make sure the PC Card eject button 1 is fully depressed
(Figure 5-26).
10. Lift up the front edge of the system board until the board is at
a 45-degree angle 2.
11. Pull the system board away from the base enclosure at a
45-degree angle 3.
Figure 5–26: Removing the System Board
Reverse the above procedure to install the system board.
238850-003.book Page 42 Friday, December 21, 2001 2:53 PM