Viconics VWG-50 (Classic ZigBee) BACnet Integration Manual User Manual
Page 24
24
Object Name
Object Type
Object Property
(Read/Write)
Controller Range / Indexes
Wireless Door Switch Status
BV
Present Value (R)
falseText=Off,trueText=On
Room Temperature Override
BV
Present Value (R,W)
falseText=Normal,trueText=Override
Outdoor Temperature Override
BV
Present Value (R,W)
falseText=Normal,trueText=Override
Room Humidity Override
BV
Present Value (R,W)
falseText=Normal,trueText=Override
Aux Command
BV
Present Value (R,W)
falseText=Off,trueText=On
Dehumidification Lockout
BV
Present Value (R,W)
falseText=Disabled,trueText=Enabled
Pulsed Heat
BV
Present Value (R,W)
falseText=Off,trueText=On
* This object is linked to UI3 input on all VT7200 and VT7300 series controller when used in binary mode. The Not
Activated / Activated flag status is changed upon a local contact closing on the input and will also result in the
SupplyTemp AV to respond from one end of its range to the other.