Water Factory Systems SQC 4 - Manual (Page 6)

A. DETERMINE THE APPLIANCE LOCATIONS
The appliance can be located under a sink or in a base-
ment depending on space availability and the customer’s
preference. If a basement installation is selected, additional
tubing, hardware and fittings may be needed and a hole will
have to be made from inside the cabinet, through the floor, to
the basement.
Never install it in an area of the home where
the temperature may drop below 40 °C, because damage to the
appliance may occur.
The exact placement of the various components of the
appliance will vary from installation to installation. The install-
er, in conjunction with the customer, must decide on where to
place the faucet, tank and filtration assembly by balancing the
homeowner’s convenience with ease of installation and servic-
ing. (See Fig. 1 & 7)
Considerations for an icemaker or other remote hookup
should be predetermined, including routing and any additional
tools, fittings, and tubing that may be required.
B. PREPARE THE AREA FOR INSTALLATION
Re move supplies from under the sink and stack them
neatly away from the working area. Ar range a light for the work
area, if necessary.
If a basement installation is called for, determine where
the components will be located and how they will be mounted.
Special mounting brackets and hardware may be necessary to
secure the appliance to a wall or ceiling joists. (See Figure 7)
Inspect the cold water supply line and determine if any
special fittings, in addition to what is included in the kit, are
required.
NOTE: It is a good idea at this time to check the condition of
the undercounter plumbing for any existing or potential leaks.
Make sure to perform any necessary repairs prior to the instal-
lation of the drinking water device.
I. Installation Instructions
3
Fig. 1
Drain
Saddle
Sink Drain
Storage Tank
Filtration System
1/4" Orange
Tubing
3/8" Yellow
Tubing
Pressure Relief Valve
(required, not included)
Storage Tank Valve
Red SFC Tubing
1/4" Green
Tubing
Feedwater
Connection
Placement
3/8" Blue
Tubing
3/8" Black
Tubing
Reducing
Union