Wiko STAIRWAY User Manual
Page 32
~
Charging the Battery
Your phone is powered by a rechargeable battery. You are
advised to charge the battery fully as soon as possible. A
flashing red light indicates that the battery level is low : if
the charge level is too low, it may shorten the life of the
battery. Connect the charger to a power outlet and the
micro UsB connector to the phone’s UsB port.
The phone’s status indicator changes to red, indicating
that the device is charging.
Once the phone has finished charging, the status indicator
changes to green and you should unplug the charger.
~
Installing the Memory Card
Your phone takes a micro sD memory card of up to 32 GB.
To install a memory card, turn the phone off then remo-
ve the back cover and take the battery out. Now insert
the memory card in the slot (between the two sIM card
compartments).