Wiko DARKFULL - Manual (Page 33)

Getting Started
~ Inserting the micro SIM card
You need to insert your micro sIM card(s) before you
can use your phone.
The slots for the cards can be found on the left side
of the handset: the eject buttons are the two small
apertures located above each tray door.
Insert the sIM ejection tool that comes with the phone
(or a small pin) into the eject button hole and press
firmly but gently until the slot opens.
Remove the slot and place the micro sIM card inside
it, inserting it correctly into the holder as shown in
the diagram.
Reposition the holder in the slot and carefully push it
back into the phone.