Wiko SUBLIM - Manual (Page 18)

Basic Operations
~ SIM Management
When you turn on your phone for the first time or change
sIM card, various items of information about the sIM
card(s) are displayed. You are asked whether you want to
modify the settings for calls, messages and the internet
connection.
If you are happy with the default settings, press on Close. If
not, press on Modify and the SIM management menu will
be brought up. Now you can:
1. Personalise the information on the sIM cards in SIM
INFO. The background colour serves to differentiate the
two sIMs in the menus using the sIMs.
2. set the default SIM* for voice and video calls, sMs/MMs
and internet data connection.
* You can still choose a different sIM when performing an
action, such as before making a call or sending an sMs/
MMs: drag the notifications panel to the bottom of the
screen and press on the sIM you want.
The default sIM will be highlighted.
If you choose “Always ask”, an icon will appear next to the
signal strength when you go to the sMs/MMs and call
menu.
~ Network Connection
The first time the phone is turned on, or when you change
sIM card(s) and re-start the phone, the Access point set -
tings menu will be brought up. Press on Modify.
Press on the name of the sIM card to display the list of
access points. Choose the one that matches your opera-
tor’s by pressing on the button on the right, then press on
RETURN to go back to the previous menu.
• APN Not Available
If your operator does not appear in the list or the list is
empty, ask your operator how to configure the APN man-
ually. To do this, press on the menu button, then New
APN and enter the information provided by your operator.
Press on the MENU button again and choose save. Return
to the previous menu, then choose the APN that you have
just saved.
• Enabling Data Connection
To check your data connection settings:
1. Go to settings > WIRELEss & NETWORks > More… >
Mobile networks > Access point names, then enable the
access point according to your operator/package.
2. Return to the previous mobile network settings menu,
then press on Data connection and press on the name of
your sIM card to enable it. *You can also drag the noti-
fications panel downwards to enable a data connection.
• 3G Service
If you have two sIM cards inserted, only one of them can be
enabled to receive the 3G service. You are advised to enable
sIM1 for the best performance. If you want to change sIM,
go to settings > WIRELEss & NETWORks > More… >
Mobile networks > 3G service > Enable 3G.
• Data Roaming
Note that for roaming sIM cards, you must enable the data
roaming in the settings > sIM management > BAsIC
sETTINGs > Roaming menu. Otherwise, the internet
connection will be disabled by default.