Troubleshooting hints – Winco W3000H User Manual
Page 9

9
1203-00
60706-220
TROUBLESHOOTING HINTS
PROBLEM (SYMPTOMS) POSSIBLE
CAUSES
———————————————————————
Won’t Start
*Low Oil Level.
*Fouled
spark
plug.
*Out
of
fuel.
*Off switch in Off position.
———————————————————————
Voltage too low
*Engine speed is too low.
*Generator
overloaded.
*Defective
stator.
*Defective
rotor
(fi eld).
———————————————————————
Circuit Breaker
*Defective load.
Trips
*Defective
receptacle.
———————————————————————
Voltage too high
*Engine speed is too high.
———————————————————————
Generator
*Overloaded.
over-heating
*Insuffi cient ventilation.
———————————————————————
No output voltage
*Short in load (disconnect).
*Broken or loose wire.
*Defective
receptacle.
*No
residual
magnetism
(in
generator).
*Defective
stator.
*Defective
rotor
(fi eld).
*Shorted
capacitor.
*GFCI
Receptacle
tripped.
———————————————————————