Winco 2-Wheel Dolly Kit Assembly Instructions for 5 KW thru 9 KW (except storm unit) (2013) - Manual (Page 3)

3 3058-03 699-026I
Remove the generator from the pallet and block generator up 8 to 0 inches to
gain access to the botton of the cradle assembly. A lifting jack or hoist may also
be used if available.
•
STEP 2
STEP 3
Attach foot support (ref. 4) to the inside of foot (ref. 3) using hardware (ref. 9 &
24). Leave these loose until the foot support is attached to the cradle.
Bolt shock mounts (ref. ) to the bottom of the foot bracket (ref. 3) using hardware
(ref. 20 & 2). Place foot bracket (ref. 3) into the front cross channel of the cradle
and bolt on with hardware (ref. 6, 23, 25). Tighten all hardware.
•
•
24
19
20
16
23
25
11
21
4
3