Winco DSE71xx Series - Manual (Page 58)

DSE Model 71xx Series Control & Instrumentation System Mk2 Operators Manual
58 Part No. 057-113 71xx Series OPERATING MANUAL ISSUE 2 12/08/2010 ADM
14.2 COMMUNICATIONS OPTION CONNECTIONS
14.2.1 DESCRIPTION
The 71xx series configuration software allows the controller to communicate with a PC. The computer connects to the module
as shown below and allows easy adjustment of the operating parameters and firmware update of the controller.
14.2.2 PC TO CONTROLLER (DIRECT) CONNECTION
To connect a 71xx series module to a PC the following items are required: -
•
71xx series module
•
71xx series configuration software (Supplied on configuration suite
software CD or available from www.deepseaplc.com free of charge).
•
USB cable Type A to Type B.
NOTE:- The DC supply must be connected to the module for configuration by PC.
NOTE:- Refer to 71xx software Manual for further details on configuring the module by PC.