Canon DVPC RECORDER 1 - Manual (Page 10)

10
Connecting the Camcorder to the Computer
1.
Set the camcorder to a recording program.
2.
Activate the DV CONTROL function.
For details, refer to the camcorder instruction manual.
3.
Connect the camcorder to the computer using the IEEE1394 (DV)
cable.
• You do not need to turn off the computer.
• Do not deactivate the DV CONTROL function while the camcorder is connected to the
computer.
• Refer to the computer manual for the location of the computer’s IEEE1394 (DV) port.
• Refer to the camcorder instruction manual for connecting instructions.
• When the camcorder is correctly connected to the computer, a camcorder icon
appears under [My Computer].
IEEE1394 Port
on the Computer DV Terminal
on the Camcorder
IEEE1394 (DV) Cable
Camcorder End Computer End
4-pin:
6-pin: