Winco RP80 W/480 VAC Receptacles - Manual (Page 4)

Page 2
60706-218 1220-00
SPECIFICATIONS
GENERATOR SPECIFICATIONS
RP55
KILOWATT 45 kW
KILOVOLT-AMPS (.8 PF)56 kVA
AMPERAGE
277/480 VOLT 3 PHASE 68 AMPS*
120/240 VOLT 3 PHASE 135 AMPS*
120/208 VOLT 3 PHASE 150 AMPS*
120/240 VOLT 1 PHASE 188 AMPS**
*Based on .8 power factor
**Single Phase is limited by the circuit breaker to 150
Amps on the full power terminal block - The additional
amperage is available through receptacles.
Derate 3% per 1000 feet (305 meters) between 300 feet
(90 meters) and 7,500 feet (2,286 meters) above sea
level. Contact the factory for rating data for operation in
altitudes above 7,500 feet (2,286 meters).
For prime power application (24/7) derate all output rating
by 10%
RP80
KILOWATT 65 kW
KILOVOLT-AMPS (.8 PF)80 kVA
AMPERAGE
277/480 VOLT 3 PHASE 98 AMPS*
120/240 VOLT 3 PHASE 195 AMPS*
120/208 VOLT 3 PHASE 225 AMPS*
120/240 VOLT 1 PHASE 233 AMPS**
*Based on .8 power factor
**Single Phase is limited by the circuit breaker to 225
Amps on the full power terminal block - The additional
amperage is available through receptacles.
Derate 3% per 1000 feet (305 meters) between 300 feet
(90 meters) and 7,500 feet (2,286 meters) above sea
level. Contact the factory for rating data for operation in
altitudes above 7,500 feet (2,286 meters).
For prime power application (24/7) derate all output rating
by 10%
GENERATOR RESISTANCE
RP55 RP80
Generator Make Stamford Stamford
Generator Model UCI224E UCI224F
Generator Winding #311 #311
Voltage Regulator SX460 SX460
Main Stator 0.05 ohms 0.033 ohms
Main Rotor 0.69 ohms 0.83 ohms
Exciter Stator 20 ohms 20 ohms
Exciter Rotor 0.156 ohms 0.156 ohms
ENGINE SPECIFICATIONS
See Iveco Operation and Maintenance Manual for com-
plete engine specifications.
TRAILER/HOUSING
RP55/RP80
Capacity 7000 lb.
Fuel Capacity 110 Gallons
Axles Single
Hitch Height Adjustable
Tires P225/75R-15
Tire Pressure 35 psi
Sound Attenuated ULTRA QUIET
Housing Housing Standard
PREPARATION
NOTE: This booklet covers the entire unit, EXCEPT THE
ENGINE. See the engine manufacturer’s operator manual
for specific maintenance and care information regarding
the engine. Read ALL instructions in the manuals pro-
vided before attempting to operate the generator set.
UNPACKING
When receiving the unit, be sure to inspect it carefully for
freight loss or damage. Check the nameplate to be sure it
is what you ordered (proper kW, voltage, fuel, etc.). If you
have questions, contact your local authorized dealer. If
you see evidence of loss or damage at the time of deliv-
ery, have the driver sign and describe the loss or damage
in the “memo of loss or damage” section on the freight
bill. Then contact the carrier to get instructions on filing a
claim.
When loss or damage is discovered after the equipment
is delivered, but not seen at the time of delivery, it is
referred to as “concealed damage.” Separate any dam-
aged material and contact the carrier for proper proce-
dures to file a “concealed damage” claim.
OIL REQUIREMENTS
This engine was filled at the factory. Before starting
check the oil level and ensure it is full. If not, refill to the
proper level. See engine manual for proper grade of oil.
OIL QUANTITY US Qt. Liters
RP55 12 12.8
RP80 12 12.8
FUEL REQUIREMENTS
See your engine operator's manual for complete type and
fuel grade information.
WARNING -NO BIODIESEL