Winco 1B40 - Manual (Page 23)

Malfunctions Possible causes Remedy Chap.
22
6.7.
Engine becomes
very hot. Indicator
lamp for cylinder
temperature
(optional extra)
comes on.
6.8.
Moisture conden-
sate emerging
from exhaust.
Too much lubricating oil
in engine.
Inadequate cooling:
- Contamination of entire
cooling air zone.
- Air duct panels not
properly sealed.
Operation off load for a pro-
longed period.
Drain off lubricating oil as far as
upper mark on dipstick.
Clean cooling air zone.
Check cooling air deflector
plates and shafts for complete-
ness and airtight seal.
Operate the machine at about
70 % load until moisture no
longer emerges from the ex-
haust.
5.3.2.
5.3.4.