XMART BYPASS 3K - Manual (Page 2)

Computer
Monitor Printer
Switch
Important Safety Warning 5
To safely operate this unit, please read and follow all instructions carefully.
Read this manual thoroughly before attempting to unpack, install, or
operate. You may keep this quick guide for further reference.
CAUTION: The product must be used indoor only.
CAUTION: Do not place the unit near liquid or in an excessively damp environment.
CAUTION: Do not place the product directly in the sun or near a hot source.
CAUTION: Do not let liquid or foreign objects enter the product.
CAUTION: Ground the product using a 2P + ground sockets.
CAUTION: When installing the product, ensure that the sum of the leakage currents
of the product and the devices it supplies not exceed 3.5mA.
Connect UPS
Connect a power cord from UPS input to UPS input socket on the unit. Use provided
power cord to connect UPS output to UPS output socket on the unit.
Connect Equipment
Connect all equipment to Output of the unit. Please refer to below charts for detailed
equipment connection.
Online UPS
Operation 4
Transfer to Maintenance Bypass
Before transferring to maintenance bypass, make sure the utility is normal.
Transfer the rotary bypass switch from “Normal” to “Bypass”. At this time, all
connected devices are powered by the utility power directly. You may turn off the
UPS and disconnect two cables connecting to UPS. Then you may now service the UPS.
Transfer to UPS Protection
After maintenance service is done, make sure the UPS operation is normal. Then,
reconnect UPS to the unit by following Installation Section. Then transfer the rotary
bypass switch from “Bypass” to “Normal”. Now, all connected devices are protected
by UPS.
16A/16A
or
16A/10A
3 Installation
Inspection
Remove the unit from the shipping package and inspect it for damage
that may occurred during transportation. Notify the carrier and place
of purchase if any damage is found.
Connect to the Wall Outlet
Plug the input power cord of the unit to the wall outlet.
Specifications
6
Current Rating
Voltage Rating
PHYSICAL
Dimension IEC
DxWxH (mm) Schuko
UK
NEMA
Net Weight (kg)
16A max. for 208/220/230/240 VAC
20A max. for 110/115/120/127 VAC
208/220/230/240 VAC or
110/115/120/127 VAC
180 x 160 x 50
180 x 200 x 50
180 x 160 x 50
1.3