Zapco DC Intro - Manual (Page 24)

Save, Save, Save… Save Your Settings
Always save your settings … Save often …
… There is nothing worse than losing all your hard work
 If you shut down the program without “Saving” you will lose your work
When you make your 1 st set-up

Save to P-1 after Crossover
 Save to P-1 after EQ settings
 Save to P-1 after delay settings
When all settings are finished, save everything
to at least 2 presets (let’s be safe)
Back-up:
When you are happy with
all settings you should “Save to File”
and store the settings in your computer
so you can restore them later if needed