Cooper-Atkins 93025 - Manual

Please register your Cooper-Atkins
product today. It is the only way to notify
you of future software/product up-grades.
There is no fee to register.
Go to: www.cooper-atkins.com,
select Product Registry and complete
the online form.
PRODUCT REGISTRY
LIMITED WARRANTY
RETURN/ REPLACEMENT INSTRUCTIONS
The SysCal™ 93025 system is backed by a 1-year probe and thermocouple
instrument Warranty on defects in workmanship and materials.
1-YEAR WARRANTY
Any instrument which proves to be defective in material or workmanship within
one year of original purchase will be repaired or replaced without charge upon
receipt of the unit prepaid with proof of purchase. This Limited Warranty does
not cover damage in shipment or failure caused by tampering, obvious
carelessness, or abuse, and is the purchaser’s sole remedy.
Because the individual probes and thermocouple work in tandem to form a
calibrated system, parts cannot be replaced individually.
REPAIR RETURN
If damaged, all probes and thermocouples must be returned together for repair
and recalibration. Limited Warranty terms apply.
SERVICE RETURN
For annual recalibration service and re-issue of certification, return all probes
and thermocouples to the address below.
Cooper-Atkins ® Corporation, 33 Reeds Gap Road, Middlefield, CT 06455-0450
800.835.5011 • www.cooper-atkins.com
93025
SysCal ™ Calibration System
Instrument Warranty and User Guide
Manufactured in the USA by Cooper-Atkins Corporation
An ISO 9001 Registered Facility and calibrated in
an ISO17025 Accredited Lab
V1014 27-958633