To lock the doors, Programming additional transmitters, Transmitter battery replacement – Ram Trucks 2015 ProMaster City - Owner Manual User Manual

Page 21

Advertising
background image

To Lock The Doors

Push and release the LOCK button on the RKE transmit-

ter to lock all doors. The turn signal lights will flash and

the horn will chirp to acknowledge the signal.

Programming Additional Transmitters

Refer to Sentry Key® “Customer Key Programming.”
If you do not have a programmed RKE transmitter,

contact your authorized dealer for details.

Transmitter Battery Replacement

NOTE:

Perchlorate Material – special handling may ap-

ply. See www.dtsc.ca.gov/hazardouswaste/perchlorate
The recommended replacement battery is CR2032.
1. Push the mechanical key release button and release the

mechanical key to access the battery case screw lo-

cated on the side of the Key Fob.

2. Rotate the screw located on the side of the Key Fob

using a small screwdriver.

3. Take out the battery case. Remove and replace the

battery observing its polarity.

4. Refit the battery case inside the Key Fob and turn the

screw to lock it into place.

Key Fob Screw Location

2

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 19

Advertising