3Com TMX 10031161 - Manual (Page 18)

12 C HAPTER 2: H ARDWARE I NSTALLATION
These slots fit over the heads of wall-mounting screws to
secure the modem to the wall.
1 Remove the mounting template from this Guide.
2 Place the mounting template against the wall at the
location chosen for the cable modem. The template should
be parallel to and at least 20 inches (50 cm) from the floor.
Insert pushpins through the template cross hairs into the
wall to mark the locations for the screws.
3 Secure the mounting screws into the wall. Do not drive the
screws flush to the wall. The screw head should be at least
¼” (6 mm) away from the wall so it can lock into the slots
on the modem’s case.
4 Fit the slots in the brackets on the modem’s underside over
the screw heads and let the modem slide down into
position.
mounting
holes
®