Harbor Freight Tools Model 94245 - Manual (Page 15)

Page 15 For technical questions, please call 1-800-444-3353. SKU 94245
pLeASe ReAd tHe FOLLOWINg CAReFULLY
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM
IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER NOR
DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE
BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR
THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT,
THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS
AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED
TECHNICIANS AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY
ARISING OUT OF HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT
PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT
PARTS THERETO.
tROUBLeSHOOtINg
Symptom possible Cause Remedy
Saw does not start when
trigger is pulled.
No power to line cord. 1.
Switch Lock Button not pushed in 2.
while pulling trigger.
Defective switch.
3.
Carbon brushes dirty or worn 4.
down.
Check electrical outlet for power. 1.
Press in button while pulling 2.
trigger.
Replace switch.
3.
Clean or replace carbon brushes. 4.
While cutting, saw slows down. Carbon brushes dirty or worn down. Clean or replace carbon brushes.
Saw blade slips while cutting. Hex Screw (42) loose. Securely tighten Hex Screw (42)
Blade Guard (20) sticks or
does not open easily.
Debris buildup in the Blade Cover
(11).
Remove Saw Blade and clean out
Blade Cover (11).
Wood burns or smokes while
being cut.
Saw Blade dull. Sharpen or replace Saw Blade.
Follow all safety precautions whenever diagnosing or servicing the tool.
disconnect power supply before service.