Philips 7P4830W199 - Manual (Page 27)

U sing the A udio A^ ideo I nput J acks
o
AUDIOA^IDEO OUTPUTS
J 'he Audio/Video Output jacks
on the TV can be used to
record TV programs on VCRs
which have Audio/Video Input
Jacks.
To record TV programs by using
the Audio/Video jacks on the TV:
<i> Connect the VIDEO OUT jack
from the TV to the VIDEO IN Jack
on the VCR.
<|> Connect the AUDIO OUT
jacks R(ight) and L(eft) from the
TV to the AUDIO IN jacks on the
VCR.
<i> Select the "ANTENNA" PIC­
TURE SOURCE control on the
TV.
With the FEATURES MENU on
screen, move the RED highlight
with the MENU buttons.
Then press the MENU (M) button.
Select the channel on the TV that
you want to record.
Turn the VCR ON. Put a cas­
sette tape in the unit and place the
VCR in the RECORD mode.
S.MART H elp
Remember, if the VCR
§has an INPUT SELECTOR
switch, place it in the LINE or
CAMERA position.
Unattended Timer Recordings
with a VCR are possible, but not
recommended with this connec­
tion since the TV must be left ON
for the VCR to record.
PICTURE AND SOUND BEING
RECORDED ON VCR.
AUDIO
OUT
(RED/
WHITE)
27 - IB7893 E(XI1