Playing a cd, Cd player – Philips AZ1207-17 User Manual

Page 10

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising

CD PLAYER

Playing a CD

Set the POWERxontrol to CD.

2 Press A OPEN to open the CD compartment.

3 Insert an audio CD (printed side up) and close the CD

compartment.

— The CD player starts and scans the contents list of the CD.

Then, the CD player stops. Display indication: the total

number of tracks.

4 Press the PLAY-PAUSE >DD button to start CD play.

Display indication: the current track number.

5 Press the STOP □ button to stop CD play.

Display indication: the total number of tracks.

You can interrupt CD play by pressing PLAY-PAUSE ND. Continue

CD play by pressing the button again.

— Display indication: the current track number flashes.

Note: CD play will also stop if:

you open the CD compartment,

the end of the CD is reached, or

- you move the

POWER

control to

TUNER or TAPE.

If you make a mistake when operating the CD player, or if the

CD player cannot read the CD, the display shows

omo. (See

"TROUBLESHOOTING".)

If you press PLAY-PAUSE >0D and there is no CD inserted, the

display shows no.

I О

Environmental information

All redundant packing material has been omitted. We have tried to make the packaging easy to

separate into three materials: cardboard (box), polystyrene foam (buffer) and polyethylene (bags,

protective foam sheet).

Your set consists of materials which can be recycled if disassembled by a specialized company.

Please observe the local regulations regarding the disposal of packing materials, dead batteries

and old equipment

Advertising