CFM Corporation 7000 - Manual (Page 16)

Locate these parts:
16
Assembly Step 5 • Attach the Side Tables to the Grill.
1. Insert 3/4" bolts through
holes in the support arms
of the side tables.
2. Attach each side table to
the four holes located in
the side of the grill bottom
using the locking hex nuts
provided.
NOTE: Model 7500 has one
RIGHT side table. Please
refer to Model 7500
Assembly Step SB1 on
page___ of this manual.
side table
( 2 )
Use hardware bag “C”:
1/4-20
hex nut
( 8 )
tools needed:
3/8" open-end wrench
7/16" open-end wrench
1/4-20 x 3/4”
bolt
( 8 )