Canon A540 - Manual (Page 70)

68
You can create a new folder at any time and the recorded images
will be automatically saved to that folder.
! When the camera is held vertically to shoot, the Intelligent
Orientation sensor judges the upper end to be “up” and the
lower end to be “down”. It then regulates the optimal white
balance, exposure and focus for vertical photography. This
function operates regardless of the on/off status of the Auto
Rotate function.
! This function can be set separately for the shooting and
playback modes.
- When this function is set to [On] in shooting mode, the
orientation will be recorded for the image shot, and the
orientation of the image will automatically be altered
during playback according to the orientation of the camera
during shooting.
- When this function is set to [On] in playback mode, the top
and bottom of the image will be correctly displayed in the
LCD monitor according to the orientation of the camera
during playback.
Creating an Image Destination (Folder)
PowerShot A540
PowerShot A530
Create New Folder
Creates a new folder the next time you shoot
images. To create an additional folder, insert
the check mark again.
Auto Create
You can also specify a date and time if you
wish to create a new folder using a shooting
time after the specified date and time.