Notes for remote control, Plug and play, Controls – Philips FWC150 User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CONTROLS
V^rcnMI
■ I-Ib
@ REPEAT
-
to repeat a track, a disc, or all
available discs.
® MUTE
-
to switch off the sound temporarily.
@ SHUFFLE
-
to play all the available discs and
their tracks in random order
® SLEEP
-
to switch the system to standby
mode at a selected time.
® <!)
-
to svifltch the system to standby
mode.
m
C01»I«»
WNm____ TAPE1.«
Notes for remote control:
- First select the source you wish
to
control by prettily one of the
source select keys on the remote
control (e.^ CD or TUNER).
- Then select the detired /unction
/►. M. W. etc.).
Important:
Before you operate the system,
complete the preparation
procedures.
Plug and Play
The system provides PLUG and PLAY
feature that allows you to store all
available radio stations auton^cally
upon power up.
If the PLUG and PLAY has not
been installed
1 Upon power up,‘'Ru'fu IfJSfRLL-
PRE55 PLRy” will be displayed.
Press
PLAY
(on the system only) to
start installation.
— "IfJSfRLL” will be displayed and
followed by "TLIfJER" and then
■RUTD’.
— The
PROGRAM
starts flashing.
— PLUG and PLAY will start
searching for all radio stations on
FM band and then followed by
radio stations on AM band.
-* All available radio stations with
sufficient signal strength will be
stored. Up to ■40 presets may be
stored.
The last preset radio station will
appear on the display when PLUG
and PLAY is completed.